Can-Am 1000 Commander Maverick Outlander Renegade Stock Motor Engine Rebuild Kit
Revive your Can-Am Commander 1000/1000R/MAX with a complete top & bottom end kit: 91mm cylinders, BPRATV 11.5:1 Wiseco pistons, crank assembly, water/oil pump kits, MLS gaskets, timing chains & seals. All new aftermarket parts with 1-year warranty. 420219745, 420219665, 420296776, 420613586, 420637414, 420620028
Can-Am 1000 Commander Maverick Outlander Renegade Complete Top & Bottom End Rebuild Kit | 91mm Stock Bore • BPRATV/Wiseco 11.5:1 • Crank, Pumps, Gaskets, Chains
🚀 One-Box Engine Revival: Stronger, Smoother, Ready to Rip
Bring your Can-Am 1000 back to peak form with this complete top & bottom end assembly kit. Built around BPRATV's Custom 11.5:1 Wiseco forged pistons and brand-new rotating components, this package restores compression, sealing, and oiling while improving durability over tired OEM parts. All items are brand new aftermarket and engineered for a precise fit.
🧰 What’s Inside: Premium Components, Inside & Out
Everything you need for a thorough refresh—top and bottom.
- 91mm Stock-Bore Cylinders (Set) – factory displacement and cooling.
- BPRATV Custom 11.5:1 Wiseco Forged Pistons (Set) – with chrome wristpins & circlips.
- Nitride-Coated Hi-Temp Ring Sets – improved sealing and longevity.
- Complete Aftermarket Crankshaft Assembly – pressed and ready with connecting rods & rod bushings installed.
- Crankshaft & Crank Balancer Bushings – stabilize the rotating assembly.
- Water Pump Rebuild Kit – shaft, impeller, gears, mechanical seal.
- Oil Pump Rebuild Kit – shaft, idle gears, rotors, seals.
- Complete Gasket Kit – includes MLS head gaskets & valve cover gaskets for reliable sealing.
- Complete Seal Kit with Viton valve stem seals – oil control under heat.
- New Timing Chains – restore cam timing accuracy and quiet operation.
- All parts are brand new aftermarket with a 1-year warranty* for peace of mind.
✅ COMPREHENSIVE FITMENT LIST
This kit is specifically designed for Naturally Aspirated (Non-Turbo) Can-Am models listed below:
- CAN-AM OUTLANDER (ATV)
- Outlander 1000 / 1000R (G2 Chassis): 2012–2024
- Outlander Max 1000 / 1000R: 2013–2024
- Outlander 6x6 1000: 2015–2024
- Includes: STD, DPS, XT, XT-P, X mr, Hunting Edition, Limited
- CAN-AM RENEGADE (ATV)
- Renegade 1000 / 1000R (G2 Chassis): 2012–2024
- Includes: STD, X xc, X mr
- CAN-AM COMMANDER (Side-by-Side)
- Commander 1000 / 1000R: 2011–2020
- Commander Max 1000 / 1000R: 2014–2020
- Includes: STD, DPS, XT, XT-P, Limited
- CAN-AM MAVERICK (Original Side-by-Side)
- Maverick 1000R (Original Body Style): 2013–2018
- Maverick Max 1000R (Original Body Style): 2014–2018
- Includes: STD, X rs, X mr, X xc, XC DPS (Non-Turbo Only)
⚠️ CRITICAL FITMENT EXCLUSIONS
This kit WILL NOT fit the following models. Please verify your machine before purchasing:
- NO TURBO MODELS: Does not fit Maverick Turbo or Maverick X3 Turbo
- NO MAVERICK X3: All X3 models use a different 3-cylinder engine
- NO DEFENDER / TRAIL / SPORT: Different rear-mounted engine configuration
- NO 800/850 MODELS: This kit is only for 1000cc (91mm bore) engines
❓ Frequently Asked Questions (FAQ)
-
Q: Which fuel should I run with 11.5:1?
A: Premium pump fuel is recommended for best performance and knock resistance. High elevation, hot climates, or heavy loads may benefit from higher octane or conservative tuning.
-
Q: Do I need ECU tuning after the rebuild?
A: Not required for stock-style setup, but verifying AFR and optimizing mapping can maximize power and reliability—especially with intake/exhaust mods.
-
Q: Are the crankshaft and pumps pre-assembled?
A: The crank is supplied assembled with rods and bushings installed. Water and oil pump kits include the service parts listed for a thorough refresh.
-
Q: What’s the break-in procedure?
A: Use quality assembly lube, prime oiling, heat cycle gently, and vary RPM for the first hours. Avoid extended idling and heavy loads until rings seat.
🌟 Why Buy from BPRATV? Commander Engine Rebuild Experts 🌟
At BPRATV, our promise is unwavering: The Best Parts. The Best Performance. The Best Price. This complete Can-Am 1000 rebuild kit is curated to deliver reliability, power, and value in one box—so you can spend less time wrenching and more time riding. Trust BPRATV to deliver the parts you need to keep your Can-Am 1000 running at its best, every single time.
Rebuild it right the first time—order now and feel the BPRATV difference! 🏁
BPRATV - The Best Parts. The Best Performance. The Best Price.
BRAPPPPPPPPPP!
© BPRATV LLC
Due to the nature of high performance and racing applications, BPRATV LLC components are sold without express warranty or any implied warranty of merchantability or fitness for a specific purpose. BPRATV LLC shall not, under any circumstances, be liable for any specific, incidental or consequential damages, including, but not limited to, damage, or loss of property or equipment, loss of profits or revenue(s), cost of purchased or replacement goods, or claims of customers of the purpose, which may arise and/or shall result from sale, installation or use of these parts. Installation of these parts may void vehicle manufacturers warranty coverage and/or may cause the vehicle to be illegal in some locations.
This product is exempt from the emission standards and related requirements of 40 C.F.R. §1051 as provided by 40 C.F.R. §1051.620, and California law. This product is sold only for use in connection with EPA-certified, purpose-built, nonroad vehicles used solely for closed-course, nonroad competition/racing.
Revive your Can-Am Commander 1000/1000R/MAX with a complete top & bottom end kit: 91mm cylinders, BPRATV 11.5:1 Wiseco pistons, crank assembly, water/oil pump kits, MLS gaskets, timing chains & seals. All new aftermarket parts with 1-year warranty. 420219745, 420219665, 420296776, 420613586, 420637414, 420620028
